Surface Jokes / Recent Jokes

By following the instructions below, you should have error-free, long-lasting floppy disks.
1. Never leave diskettes in the disk drive, as data can leak out of the disk and corrode the inner mechanics of the drive. Diskettes should be rolled up and stored in pencil holders.
2. Diskettes should be cleaned and waxed once a week. Microscopic metal particles can be removed by waving a powerful magnet over the surface of the disk. Any stubborn metallic shavings can be removed with scouring powder and soap. When waxing the diskettes, make sure the surface is even. This will allow the diskette to spin faster, resulting in better access time.
3. Do not fold diskettes unless they do not fit into the drive. "Big" diskettes may be folded and used in "little" disk drives.
4. Never insert a diskette into the drive upside down. The data can fall off the surface of the disk and jam the intricate mechanics of the drive.
5. Diskettes cannot be backed up by more...

By following the instructions below, you should have error-free, long-lasting floppy disks.
Never leave diskettes in the disk drive, as data can leak out of the disk and corrode the inner mechanics of the drive. Diskettes should be rolled up and stored in pencil holders.
Diskettes should be cleaned and waxed once a week. Microscopic metal particles can be removed by waving a powerful magnet over the surface of the disk. Any stubborn metallic shavings can be removed with scouring powder and soap. When waxing the diskettes, make sure the surface is even. This will allow the diskette to spin faster, resulting in better access time.
Do not fold diskettes unless they do not fit into the drive. "Big" diskettes may be folded and used in "little" disk drives.
Never insert a diskette into the drive upside down. The data can fall off the surface of the disk and jam the intricate mechanics of the drive.
Diskettes cannot be backed up by running them through more...

By following the instructions below, you should have error-free, long-lasting floppy disks. Never leave diskettes in the disk drive, as data can leak out of the disk and corrode the inner mechanics of the drive. Diskettes should be rolled up and stored in pencil holders.Diskettes should be cleaned and waxed once a week. Microscopic metal particles can be removed by waving a powerful magnet over the surface of the disk. Any stubborn metallic shavings can be removed with scouring powder and soap. When waxing the diskettes, make sure the surface is even. This will allow the diskette to spin faster, resulting in better access time.Do not fold diskettes unless they do not fit into the drive. "Big" diskettes may be folded and used in "little" disk drives.Never insert a diskette into the drive upside down. The data can fall off the surface of the disk and jam the intricate mechanics of the drive.Diskettes cannot be backed up by running them through the xerox machine. If more...

In an effort to clarify questions about the purported durability and unusual physical characteristics of Twinkies, we subjected the Hostess snack logs to the following experiments: ExposureA Twinkie was left on a window ledge for 4 days, during which time an inch and a half of rain fell. Many flies were observed crawling across the Twinkie's surface, but contrary to hypothesis, birds, even pigeons, avoided this potential source of substance. Despite the rain and prolonged exposure to the sun, the Twinkie retained its original color and form. When removed, the Twinkie was found to be substantially dehydrated. Cracked open, it was observed to have taken on the consistency of industrial foam insulation; the filling however, retained its advertised "creaminess"RadiationA Twinkie was placed in a conventional microwave oven, which was set for precisely 4 minutes - the approximate cooking time of bacon. After 20 seconds, the oven began to emit the Twinkie's rich, characteristic more...

1. Never leave diskettes in the disk drive, as data can leak out of the disk and corrode the inner mechanics of the drive. Diskettes should be rolled up and stored in pencil holders.
2. Diskettes should be cleaned and waxed once a week. Microscopic metal particles can be removed by waving a powerful magnet over the surface of the disk. Any stubborn metallic shavings can be removed with scouring powder and soap. When waxing the diskettes, make sure the surface is even. This will allow the diskette to spin faster, resulting in better access time.
3. Do not fold diskettes unless they do not fit into the drive. "Big" diskettes may be folded and used in "little" disk drives.
4. Never insert a diskette into the drive upside down. The data can fall off the surface of the disk and jam the intricate mechanics of the drive.
5. Diskettes cannot be backed up by running them through the xerox machine. If your data is going to need to be backed up, simply insert more...

Ever wonder whether anybody could be so dumb as to require
instructions telling them how to play with a Slinky (a
children's toy consisting of a large flexible spring)?
Well, in case you were wondering HERE are the instructions
that come with one:
TO PLAY WITH SLINKY IN HANDS
Hold end coils of Slinky with both hands. Now raise and
lower each hand in a rhythmic motion.
TO BOUNCE SLINKY UP AND DOWN
Hold a few coils lightly in one hand, allowing rest of
Slinky to hang down. Now in a bouncing motion, move
hand slowly up and down.
TO WALK SLINKY DOWN INCLINE OR SLOPE
Any board or table top with a non-slip surface will do.
Slope surface so rise equals about 1 foot for every 4
foot length. Place Slinky at top, flip and watch Slinky
start down, end over end.

Never leave diskettes in the disk drive, as data can leak out of the disk and corrode the inner mechanics of the drive. Diskettes should be rolled up and stored in pencil holders. Diskettes should be cleaned and waxed once a week. Microscopic metal particles can be removed by waving a powerful magnet over the surface of the disk. Any stubborn metallic shavings can be removed with scouring powder and soap. When waxing the diskettes, make sure the surface is even. This will allow the diskette to spin faster, resulting in better access time. Do not fold diskettes unless they do not fit into the drive. "Big" diskettes may be folded and used in "little" disk drives. Never insert a diskette into the drive upside down. The data can fall off the surface of the disk and jam the intricate mechanics of the drive. Diskettes cannot be backed up by running them through the Xerox machine. If your data is going to need to be backed up, simply insert two diskettes into the drive. more...